Table of Contents
Advertisement
•
Ensure that all employees working with the system are familiar with the object and ambient
conditions, the safety concept, the protection task, and, if applicable, the monitoring task of
a higher-level fire detection system before starting work.
•
Instruct a responsible person on the operator side on how to carry out the work and on
checks that must be carried out by the operator, and document this instruction.
•
Document the actual status of the system at the time of the handover and inform a respon-
sible person on the operator side of the actual status.
•
Mark selector valves and blocking devices in multi-zone systems in such a way that assign-
ment to the individual extinguishing zones is possible.
2.8.1 Training
The Authorized Distributor must instruct the owner or the person in charge of the system in
the handling of the system and subsequently hand over the operating manual to this person.
For better traceability an instruction log must be drawn up with at least the following con-
tents:
•
Date of the instruction
•
Name of the person being instructed
•
Content of the instruction
•
Name of the instructor
•
Signatures of the instructed person and the instructor
2.9 Safety and protective devices
WARNING Risk of injury due to non-functioning safety devices.
If safety devices are not functioning or have been rendered inoperable, there is danger
of severe injuries and considerable material damage.
• Before starting work, check whether all safety devices are functioning and correctly installed.
• Never render safety devices inoperable or bypass safety devices.
• Ensure that all system safety devices are always accessible.
The system has various safety devices that are described below.
18
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
Advertisement
Table of Contents
