Table of Contents
Advertisement
FIGURE 5-11: Release pin; not activated (up), activated (down)
WARNING Risk of faulty release
Make sure that the release pin is in the not activated position.
The activated position is indicated by the red marking on the release pin, or by mea-
suring.
1. Release pin in the "not activated" position
2. Release pin indicator
3. Release pin in the "activated" position
5. Tension the activated release device as required.
Observe the documentation of the release device.
86
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
Advertisement
Table of Contents
