Table of Contents
Advertisement
Appendix A - Racking Assembly
12
This chapter is intended for expert installation personnel who are familiar with the handling of the
fire extinguishing systems described herein.
This document contains neither detailed information concerning project planning of the system,
nor detailed information concerning operation and maintenance. For this, observe the design
manual and the operation manual. These documents and be found on the Viking website.
12.1 Introduction
The Oxeo support and racking system is ordered and delivered separately from the system. The
specific arrangement and measurements of the racking system components depends upon the
size and number of cylinders included in the design of the system. For more information on sys-
tem design, refer to the design manual.
There are slight differences in the assembly measurements between the single, double, and triple
row arrangements and the tolerance stack-ups can cause problems if the instructions are not fol-
lowed carefully.
183
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
Advertisement
Table of Contents
