Pre-assembling the occupiable space protection kit
FIGURE 5-19: Assembled "adapter connection DN8" on to the pressure reducer
1. Adapter connection DN8
2. Pressure reducer
8. Screw the "adapter connection DN8 onto the union nut of the pressure reducer using a size 19
flat wrench.
Assembling the pre-assembled "pressure reducer" assembly and electrical release device
on the quick release valve
FIGURE 5-20: Assembling the "adapter connection" on the quick release valve
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
95