Table of Contents
Advertisement
Improper maintenance can cause serious injury and substantial property damage.
• Prior to commencing work, make sure there is sufficient space for performing the installation.
• Make sure the installation site is tidy and clean! Components and tools that are laying around
• If components were replaced, carry out the installation according to the specifications in this ser-
• Make sure that all servicing work is only carried out by appropriately qualified personnel.
If the fire extinguishing system is accidentally triggered when carrying out work (assembly, mainte-
nance etc.), extinguishing agent may escape in an uncontrolled manner. This can cause serious injury
and substantial damage to the system.
• Secure the fire extinguishing system against accidental activation before carrying out any work.
• Immediately vacate the extinguishing zone in case of faulty release.
• Inform all persons working in the area of the fire extinguishing system in advance about the dan-
False alarm
The alarm devices are activated as part of the functional tests. When the signaling
devices sound, this does not mean that there is an alarm situation. Inform personnel
working in the system area about possible false alarms before commencing work.
Maintenance interval
The works listed below must be carried out at least annually.
If different local laws, regulations or guidelines demand shorter maintenance intervals, these
must be adhered to. If there are special environmental conditions, e.g.corrosive atmosphere,
increased dirt load or extreme temperature fluctuations, shorter maintenance intervals may
be required.
Shorter service intervals, which can be prescribed for fire alarms, for example, do not apply to
this fire extinguishing system.
152
WARNING Risk of injury due to improperly executed maintenance work
loosely or on top of each other pose a potential source of accidents.
vice manual. Reinstall all the fixing elements and observe the specified screw tightening torques.
WARNING Risk of injury due to escaping extinguishing agent
ger of faulty release and familiarize them with the measures to be taken in such an event.
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
Advertisement
Table of Contents
