Table of Contents
Advertisement
FIGURE 5-33: Marking on the enclosure
1. Circuit symbol
2. Conformity mark
3. Manufacturer's mark
4. VdS type approval code
5. Delay time (factory setting)
6. Working pressure
7. Type designation
8. Serial/batch number
1. Check whether the working pressure specified on the enclosure corresponds to the actual
operating conditions.
FIGURE 5-34: Checking the adjusting spindle and sealing wax
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
109
Advertisement
Table of Contents
