Table of Contents
Advertisement
5.4.6 Assembling the monitoring of the electrical release device
FIGURE 5-13: Attach limit switch
1. M4 x 30 cylinder bolts
2. Washers
3. QRV support bracket
1. Attach the limit switch to the holder QRV with two M4 x 30 cylinder bolts and two washers.
Do not screw the limit switch tightly. Slight mobility simplifies the further assembly
steps.
88
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
Advertisement
Table of Contents
