Table of Contents
Advertisement
FIGURE 5-22: Release pin deactivated (A) and activated (B)
1. Marking
2. Release pin
WARNING Risk of faulty release
Make sure that the release pin is in the deactivated position. If necessary, tension the activated elec-
trical release device.
The red marking on the release pin is visible in both the activated and deactivated
position and is thus not an indicator of whether or not the electrical release device is
under tension.
The activated position can be identified if the release pin protrudes from the enclo-
sure of the electrical release device.
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
97
Advertisement
Table of Contents
