Transporting
FIGURE 3-4: Transport with the forklift
1. Drive the forklift with the forks between or under the spars of the pallets.
2. Drive in the forks until they protrude on the opposite side.
3. If there is an eccentric center of gravity, ensure that the pallet cannot tilt.
4. Lift the pallet with the transport package and start the transport
3.3 Packaging
About the packaging
The individual packages are packed in boxes or crates in accordance with the expected transport
conditions.
The packaging should protect the individual components from transport damage and other dam-
age until the components are mounted. Consequently do not destroy the packaging and only
remove it just before the components are mounted.
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
33