Table of Contents
Advertisement
Transporting filled extinguishing agent containers
Filled extinguishing agent containers are dangerous goods of class 2.2 (non-ignitable, non-
toxic gases). The extinguishing agent containers must thus be transported in accordance with
the valid local regulations for the transport of dangerous goods.
1. Contact the local specialist for the transport of dangerous goods and inquire about the
regulations on transporting extinguishing agent containers.
FIGURE 3-1: Valve (example)
2. Make sure that the locking nut on the valve output and the blanking plugs on the control
output are attached.
FIGURE 3-2: Valve protection cap (example diagram)
3. Screw on the valve protection cap to the extinguishing agent container.
30
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
Advertisement
Table of Contents
