Table of Contents
Advertisement
5.3 Manifold Assembly
Personnel:
•
Authorized Distributor
Protective equipment:
•
Safety gloves
•
Safety footwear
Dimensioning of the manifold is primarily based on the hydraulic calculation.
During the assembly of the manifold, pay attention to whether it is for a one-, two-, or
multiple-row extinguishing cylinder set-up
FIGURE 5-1: Manifold assembly
1. Bolt
2. Bracket
3. Manifold
1. Install the racking assembly brackets and cut an appropriate length of rubber (see
"Appendix I - Racking Assembly" on page 191.)
74
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
Advertisement
Table of Contents
