Table of Contents
Advertisement
Checking the pipe union
The cut ring union must be removed to check the pipe union.
9. Loosen the union nut with an open-end wrench.
FIGURE 5-52: Correct assembly with a clearly visible band of cut material
10. Check whether the band of cut material completely covers the front surface of the cut
ring.
=>The assembly is correct if there is clearly visible cut pipe material.
For comparison, Figure 5-53 on page 124 shows the cut ring before assembly without
a band of cut material.
FIGURE 5-53: Cut ring prior to assembly without a band of cut material
124
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
Advertisement
Table of Contents
