Table of Contents
Advertisement
FIGURE 5-18: Screwing in the contact pressure gauge
1. Size 14 flat
2. Proper positioning of flat
7. If the contact pressure gauge is pressurized and is therefore more difficult to turn, screw it
on the size 14 flat with a suitable tool until it stops.
To align, the contact pressure gauge can be turned back by a maximum of 3/4 rota-
tion.
94
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
Advertisement
Table of Contents
