Table of Contents
Advertisement
FIGURE 5-50: Marking the union nut
8. To check the necessary number of rotations, mark the position of the union nut to the pipe
with a marker.
FIGURE 5-51: Holding the union body in place with an open-end wrench
WARNING Danger of leaks or pipes slipping out from incorrect assembly
Tighten the union nut max. 1.5 rotations and hold the union body in place with an open-end wrench
so that the pipe does not rotate with it.
A deviant tightening distance reduces the compressive strength and the service life of
the pipe union.
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
123
Advertisement
Table of Contents
