Table of Contents
Advertisement
A type plate is attached to each pilot cylinder. For safety reasons, all pilot cylinders must be
mounted using a wall support set on stable building elements (e.g. a wall).
Pilot cylinders may not be moved and transported unless fitted with a protective valve cap
and locking nut on the valve output. Filled pilot cylinders must be labeled and transported as
hazardous material in accordance with all applicable local guidelines.
Contact pressure gauge "pilot cylinder"
FIGURE 4-21: Contact pressure gauge
1. Contact pressure gauge
The contact pressure gauge monitors any pressure drop in the pilot cylinder.
The contact pressure gauge is screwed into the connection thread M12 x 1 on the quick
release valve QRV.
56
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
Advertisement
Table of Contents
