Pilot Hoses For Activation Of "Slave" Cylinder; Monitored Blocking - Viking Oxeo Installation And Maintenance Manual

4.8 Pilot hoses for activation of "slave" cylinder

FIGURE 4-13: Hose DN4 x 600 - MX PH300
The hose DN4 (5/32") serves as a flexible connection between the valve of the extinguishing agent
container "master" and the pneumatic release device of an extinguishing agent container "slave"
as between other "slave" extinguishing agent containers.
The master/slave combination is only used if no pilot cylinder is required and there are no life
safety requirements.
Both connections have a thread of M12 x 1.5 and 24° sealing cone (light series) with O-ring (DKOL).
Designation
20" Flexible Oxeo pilot hose
39" Flexible Oxeo pilot hose
59" Flexible Oxeo pilot hose
20" Flexible Oxeo pilot hose, kit
39" Flexible Oxeo pilot hose, kit
59" Flexible Oxeo pilot hose, kit

4.9 Monitored blocking

FIGURE 4-14: Monitored blocking device
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
Thread Part no.
M12 x 1.5 24467
M12 x 1.5 24468
M12 x 1.5 24469
See tech data 25132
See tech data 25133
See tech data 25134
49