Table of Contents
Advertisement
WARNING Risk of injury due to improper installation and initial commissioning
Improper installation and commissioning can lead to severe injuries or even death as well as signifi-
cant property damage.
• Prior to starting tasks ensure that there is adequate free space for installation.
• Handle open, sharp-edged components carefully.
• Ensure order and cleanliness at the installation location! Parts and tools that are lying loose or on
• Mount components properly. Maintain the prescribed bolt torque and tightening torque.
WARNING Danger of injury due to escaping extinguishing agent
If the system is unintentionally activated in the course of assembly, extinguishing agent can escape
uncontrolled. This can lead to severe injuries or even death, as well as significant property damage.
• Remove all safety pins on components of the system only after complete assembly of the compo-
• Block the system or parts of the system as needed.
• Ensure that the valve output is always closed with a locking nut and connected to a pipe line.
• Only mount release devices when the extinguishing agent containers have been connected to
• Use a clamp to make sure the extinguishing agent container is adequately braced against tipping
• If there is a faulty release, exit the extinguishing zone immediately.
• Instruct all persons working in the fire extinguishing zone, in advance, of the danger of a faulty
WARNING Danger due to contamination
Contaminated pneumatic pilot lines or pipelines can cause individual components to malfunction
and thus also cause the whole system to malfunction. This can cause serious injury or even death,
and may also cause substantial property damage.
• Before assembly, check all pneumatic pilot lines and pipelines for contamination (e.g.particles or
70
top of each other are accident hazards.
nents.
the pipe network.
over.
release and familiarize them with the measures that must be initiated in this case.
grease) and clean if necessary.
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
Advertisement
Table of Contents
