12.4.6 Installing the Support Structure
Refer to
1. Measure and mark the location of the first upright post.
2. Drill pilot holes for the concrete anchors (wall or floor depending on your system).
3. Install the upright post using the concrete anchors (P-wall or M-floor), wolf washers (B), and
the included nuts and washers.
NOTE Floor mount versions use the 1/2" X 5 1/2" concrete anchor.
FIGURE 12-4: Mounting the upright supports
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
P
B
P
B
P
B
Wall mount
M
M
Floor mount
193