Table of Contents
Advertisement
•
Reactive metals (e.g. sodium, potassium, magnesium, titanium or zirconium) and reactive
hybrids or metal amides.
In certain circumstances, some of the mentioned fire types can be suppressed using
IG-01 (argon). Consult the manufacturer about this.
2.4 Safe operation
If system components are used improperly or for other than their intended purpose, the sys-
tem in which they are used can pose hazards or be impaired. Only use undamaged and fully
functional products and machines. If safe operation damage can no longer be assured (for
example, if visible damage is present), put the system out of operation without delay and
secure against accidental commissioning.
Also observe the following:
•
Use only original spare and wear parts.
•
Replace parts that are not in perfect condition immediately.
•
Do not carry out any changes, extensions or modifications without the express permission
of the manufacturer or distributor.
This also applies to welding work on load-bearing parts.
Any changes, extensions or modifications not approved by the manufacturer are the
sole responsibility and liability of the person making the modification and exclude any
responsibility of the manufacturer.
8
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
Advertisement
Table of Contents
