Table of Contents
Advertisement
The pneumatic control device is used to activate:
•
Extinguishing agent container batteries
•
Selector valves
•
Pneumatic control and alarm components
An 80 l pilot cylinder is used.
The pneumatic control device can additionally be connected to a reserve pilot cylinder via a shut-
tle non-return valve.
Pilot cylinder with wall support
FIGURE 4-20: Pilot cylinder with unistrut racking
1. Protective cap
2. Locking nut
3. Pilot cylinder
4. Unistrut racking
Nitrogen (N
The pilot cylinders are designed, manufactured, and labeled in accordance with European guide-
lines (EU/UN) or in accordance with the country-specific pressure equipment guidelines.
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
) is stored as control gas in pilot cylinders with a volume of 80 l (21.13 gal).
2
55
Advertisement
Table of Contents
