Table of Contents
Advertisement
Protective valve caps
Protective valve caps are used to protect sensitive components (e.g. valves) of the extinguish-
ing agent containers. They prevent the valves from being damaged during transport. The pro-
tective valve caps must be attached before each transport.
Locking nut
The locking nuts seal the valve outlets, e.g. during transport or storage, so that extinguishing
agent does not escape in the event of unintentional activation. They are provided with vent
bores in order to enable a controlled release of pressure in case of unintentional activation.
The locking nuts are connected to the valves by means of loss protection devices.
2.10 Signage
The following symbols and information signs have been attached in the area of the system.
WARNING Risk from illegible or missing signs.
Over time, stickers and signs can become dirty or illegible for other reasons, so that
risks can no longer be recognized and necessary operating instructions can no longer
be adhered to. This will lead to risk of injury.
• Keep all safety, warning and operating instructions easily legible at all times.
• Immediately replace damaged signs or stickers.
20
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
Advertisement
Table of Contents
