Table of Contents
Advertisement
4. Position the bottom Z-bracket approximately 30 inches from the floor and snug the break-
off bolt in place but do not break it off.
FIGURE 12-5: Locating the horizontal support brackets
5. For floor mount versions, loosely install floor brace using the retaining nut (D), wolf washer
(B), and break-off bolt (E) attached to the post, and concrete anchor (N) in the floor.
FIGURE 12-6: Mounting the floor braces
194
~30 inches
(760 mm)
D
B
E
N
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
Advertisement
Table of Contents
