Table of Contents
Advertisement
Improper transport of hazardous goods
WARNING Life-threatening danger due to improper transport of hazardous goods
The extinguishing containers are hazardous goods if they are filled with or contain residual quanti-
ties of extinguishing agents, e.g. after a release. If extinguishing agent containers are damaged due
to improper transport, severe to fatal injuries can occur.
• Always transport extinguishing agent containers in compliance with the instructions contained in
• Comply with locally valid regulations concerning transport of hazardous goods.
• Only remove protective valve caps of the extinguishing agent containers after they have been
• Comply with the additional instructions on the extinguishing agent containers.
NOTICE Material damage due to improper transport
Improper transport may cause transported items to fall down or topple over. This may cause signifi-
cant and costly material damage.
• Proceed carefully during the unloading of the transport pieces during delivery as well as during
• Only use the designated attachment points.
• Only remove packaging immediately prior to installation.
3.1 Transport inspection
1. Check all system parts for completeness and transport damage immediately upon receipt.
2. Check the fill quantity of the extinguishing agent container.
3. If there is apparent external transport damage or if an extinguishing agent container does
not have the specified fill quantity, proceed as follows:
•
Do not accept the delivery or only accept the delivery with reservation.
•
Note the scope of the damage on the transport documents or on the freight forwarder's
delivery ticket.
•
Initiate a complaint procedure.
Report every complaint as soon as it is detected. Claims for damage compensation
can only be asserted within the applicable period specified for the reporting of com-
plaints.
28
this manual.
mounted at the installation site; reattach the protective valve caps prior to every transport.
the transport to its final destination and comply with the symbols and information displayed on
the packaging.
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
Advertisement
Table of Contents
