Table of Contents
Advertisement
FIGURE 3-3: Hazard label
4. Identify the extinguishing agent containers as class 2 dangerous goods by applying the hazard
label.
5. Check that the dangerous goods label (UN number and name) is present.
6. Fasten the extinguishing agent containers standing up in a suitable transport frame or lying
down on a pallet, and secure against sliding.
7. Transport the pallets in accordance with the specifications in this instruction.
Transporting empty extinguishing agent containers
Extinguishing agent containers that have been activated contain a residual pressure of approx. 22
psi (1.5 bar). This residual pressure prevents dirt and moisture entering the container via the valve
output.
Depending on the valid local regulations, this container represents a dangerous good and is thus
subject to the regulations for transporting dangerous goods.
Contact the local specialist for the transport of dangerous goods and inquire about the regula-
tions on transporting activated extinguishing agent containers.
With a residual pressure of up to max. 29 psi (2 bar), the extinguishing agent container
is not subject to dangerous goods regulations.
at 68 °F (20 °C)
Inst. and Maint. Manual | Oxeo PR LCP | F_101921 Rev 02 | 10-2022 | en
31
Advertisement
Table of Contents
