Closing Driveshields - MacDon R113 Assembly Instruction Manual

7.3 Closing Driveshields

Driveshields protect people from rotating belts and drives.
WARNING
To reduce the risk of personal injury, do NOT operate the machine without the driveshields in place and secured.
NOTE:
Images shown in this procedure are for the left driveshield—the right driveshield is similar.
1. Position driveshield onto pins (if necessary).
2. Push driveshield (A) to engage latch (B).
3. Ensure the driveshield is properly secured.
4. Replace tool (B) and lynch pin (A) on pin (C).
215585
LUBRICATING THE ROTARY DISC PULL-TYPE
136
Figure 7.10: Driveshield and Latch
Figure 7.11: Left Driveshield
Revision A