9.2 Closing Driveshields
CAUTION
Do NOT operate the machine without the driveshields in place and secured.
NOTE:
Images shown are for left driveshield—right driveshield is similar.
1. Position driveshield onto pins at base of driveshield
(if necessary).
2. Push driveshield (A) to engage latch (B).
3. Check that driveshield is properly secured.
4. Replace tool (B) and lynch pin (A) on pin (C).
214075
REFERENCE
Figure 9.5: Left Driveshield
Figure 9.6: Left Driveshield
85
Revision A