Inspecting Cutterblade Hardware - MacDon R85 Operator's Manual

IMPORTANT:
The discblades have cutting edges on both sides so the
blades can be turned over and reused. The twist in each
blade determines the cutting direction. If you are unsure
which direction the spindles rotate, refer to
Direction of Spindle Rotation, page

Inspecting Cutterblade Hardware

CAUTION
Damaged or loose discblades or blade attachment hardware can be ejected during machine operation and
may cause personal injury or machine damage.
214366
MAINTENANCE AND SERVICING
5.3.1
137.
142
Figure 5.17: Counterclockwise Disc Rotation
Direction
Figure 5.18: Clockwise Disc Rotation Direction
Revision A