Set The 'Simulate Colorwave 600 Economy Mode' Setting - Oce ColorWave 650 User Manual

Set the 'Simulate ColorWave 600 Economy mode' setting

Introduction
You can use the 'Simulate ColorWave 600 Economy mode' setting in the Océ Express
WebTools to define how the Océ ColorWave 650 must interpret the 'Economy' 'Print
Setting' for both monochrome and colour prints.
Note:
The 'Simulate ColorWave 600 Economy mode' setting is available for print jobs and
copy jobs.
Before you begin
This setting is editable for the Key operator or Power user.
How to set the 'Simulate ColorWave 600 Economy mode' setting
Click 'Preferences' - 'Print job defaults' or 'Preferences' - 'Copy job defaults'.
1.
Click 'Edit' in the 'Basic' bar or click the value of the 'Simulate ColorWave 600 Economy
2.
mode' setting.
Select 'Enabled' if you want prints printed with the 'Economy' 'Print Setting' resemble
3.
prints produced by a ColorWave 600 printer. This will result in a higher toner usage and
a lower productivity.
Select 'Disabled' if you don't want to use the Colorwave 600 economy setting. This results
in a higher print speed.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
4.
Set the 'Simulate ColorWave 600 Economy mode' setting
Chapter 8 - Print quality and Print productivity 343