7.11 Replacing the Drain Pump Head with Tubing
When
Parts and additional items required
Preparations
Follow these steps
Integral Fraction Collector FT (VF-F20-A) Operating Manual
•
Drain pump tubing is worn or damaged
•
Drain pump head is broken
Replacement drain pump head with tubing
Make sure that the drain pump is turned off.
Figure 81: Configuration of drain pump head with tubing (waste tubing)
No.
Description
1
Drain Pump Head
2
Elbow tubing connector
3
Condensation Tubing
1. Rotate the drain pump head counterclockwise slightly with and
remove it gently.
2. Disconnect the condensation tubing on the left from the tubing
connectors. Leave the tubing connectors connected to the drain
pump head.
•
7
Maintenance and Service
No.
Description
4
Straight Tubing Connector
5
Waste Tubing (pre-installed with
the pump head)
Page 181