Integral Fraction Collector FT (VF-F20-A) Operating Manual
No.
Description
4
Depending on fraction collection mode
and flow rate
Delay capillary for time-based
fractionation:
•
Up to 2 mL/min: 0.1 x 350 mm, MP35N
•
2 - 10 mL/min: 0.18 x 350 mm, MP35N
Delay capillaries for peak-based
fractionation
•
Up to 0.5 mL/min: 0.18 x 1200 mm,
MP35N
•
0.5 – 1 mL/min: 0.25 x 1500 mm, MP35N
•
1 - 2 mL/min: 0.5 x 800 mm, PEEK
•
2 - 10 mL/min: 1 x 1000 mm, PEEK
5
Depending on flow rate
Needle capillary for up to 5 mL/min, 0.18 x
415 mm, PEEK
Needle capillary for 5 – 10 mL/min, 0.25 x
415 mm, PEEK
6
Depending on flow rate
Flush buffer loop for up to 5 mL/min, 50
µL, PEEK
Flush buffer loop for 5 - 10 mL/min, 100 µL,
PEEK
7
Waste fluidic
For a one stack configuration with a Vanquish Core HPLC system the flow
path connection are as follows:
No.
Description
1
0.18 x 350mm, SST
2
Passive pre-heater, SST
3
Depending on detector:
•
0.13 x 300 mm, SST
•
0.13 x 300 mm, SST
•
0.13 x 350 mm, SST
•
0.13 x 450 mm, SST
•
5
Installation
Shipped with
Integral Fraction Collector FT
Optional, needs be ordered separately
Integral Fraction Collector FT
Optional, needs be ordered separately
Integral Fraction Collector FT
Optional, needs be ordered separately
Detector
Shipped with
System Base Vanquish Core
System Base Vanquish Core
•
Diode Array Detector CG
•
Multiple Wavelength Detector CG
•
Variable Wavelength Detector C
•
Fluorescence Detector C & D-PMT
Page 73