After Maintenance - Thermo Scientific VF-F20-A Operating Manual

•
7 Maintenance and Service

7.13 After Maintenance

When
Follow the steps
Page 186
The section describes how to restart the fraction collector after
respective maintenance procedures.
See the steps in the respective maintenance section to obtain if
restarting the fraction collector after maintenance is required for the
procedure.
1. Perform the required parameter updates or adjustments. Follow the
instructions in the respective maintenance procedures.
2. Prepare the fraction collector for operation. See
Device for Operation
Integral Fraction Collector FT (VF-F20-A) Operating Manual
( page 105).
Preparing the