Thermo Scientific VF-F20-A Operating Manual page 52

•
4 Unpacking and Transport
Remove the shipping locks and protection foams
Page 52
9. Some surfaces including the doors of the device are covered by a
protective film during shipment. Remove the protective film from all
surfaces as applicable.
10. Remove any remaining shipping locks or protective covers from the
fraction collector as required. Shipping locks are marked for
removal.
1. Remove two white protective foams from R and G segments of the
carousel.
Figure 15: Remove two carousel protection foams
2. Remove the shipping lock fixing needle arm. Unscrew three screws
on the shipping lock completely with the screwdriver, then remove
the shipping lock.
Figure 16: Remove needle arm shipping lock
Integral Fraction Collector FT (VF-F20-A) Operating Manual