Thermo Scientific VF-F20-A Operating Manual page 82

•
5 Installation
Setting up the Needle Wash Line in the Fraction Collector
Page 82
3. Purging the needle wash system.
Follow the steps in the respective sections further down.
1. Connect the needle wash line to the needle wash pump outlet port
in the device.
Figure 29: Needle wash line connection
No. Description
1 Needle wash line (up to needle wash reservoir)
2. Route the needle wash inlet line from the device to the solvent rack,
through the tubing guides of the modules and the guide hole in the
solvent rack.
Figure : Guide hole and tubing guides in the solvent rack
Integral Fraction Collector FT (VF-F20-A) Operating Manual