Thermo Scientific VF-F20-A Operating Manual page 188

•
7 Maintenance and Service
Page 188
No. Description
1 Main power switch (on/off control)
2 Fuse holder
3 Power-inlet connector
1. Use the screwdriver to remove the fuse holder. To do this, insert a
small flat screwdriver into the slot next to the fuse holder and
remove the cover cap with a lever movement.
2. Replace the two fuses with new fuses of the specified type and
current rating. Always replace both fuses.
3. Reinstall the fuse holder.
4. Reconnect the power cord to the power source and to the device.
5. Turn on the device with the main power switch.
Integral Fraction Collector FT (VF-F20-A) Operating Manual