Removing The Front Plate - Thermo Scientific VF-F20-A Operating Manual

7.6

Removing the Front Plate

When
Parts required in case repair
Tools required
Preparations
Follow these steps
Integral Fraction Collector FT (VF-F20-A) Operating Manual
1. For needle capillary installation
2. For easier access to inner fluidic components
3. For easier access to needle unit
4. For replacement if case of broken front plate cable
Replacement front plate
Screwdriver, Torx T10
Turn off the device with its main power switch.
NOTICE The device shall be powered off while replacing the front plate.
1. Loosen the two screws that attaches the removable front plate with
the screwdriver. The screws shall remain in the front plate.
Figure 57: Loosening the two screws in front plate
•
7 Maintenance and Service
Page 155