Thermo Scientific VF-F20-A Operating Manual page 161

Follow these steps
Integral Fraction Collector FT (VF-F20-A) Operating Manual
1. Remove the front plate. See
2. Remove needle wash outlet line from the needle wash port inlet by
unscrewing the fitting and pull out tubing from the needle wash
pump outlet as shown below, then connect the new needle wash
outlet line to the free needle wash port inlet and the free needle
wash pump outlet and fit in the new needle wash outlet line into the
slot on the housing.
4
Figure 63: Needle wash outlet line
No. Description
1 Needle wash port inlet
2 The slot on the housing
3 Needle wash pump outlet
3. Re-install the front plate. See
( Page 155).
•
7 Maintenance and Service
Removing the Front Plate
2
5
1 3
No. Description
4 Needle wash port
5 Needle wash outlet line
Removing the Front Plate
( Page 155).
Page 161