Wago Webserver I/O Field; Table 28 Parameterization Overview - WAGO 765-1202/0100-0000 Product Manual

Functions
Tool
WAGO I/O Field Webserver The WAGO I/O Field Webserver is a Webserver that is integrated into the 765
WAGO I/O Field App
Two configuration and parameterization sections are distinguished:
1. The EtherCAT configuration: select EtherCAT
2. The port configuration: digital input or output
The following table shows which tool can influence which section.
Tool
EtherCAT
WAGO I/O Field Web-
server
WAGO I/O Field App
Note
Parameters via EtherCAT
Each time EtherCAT
and parameters to the module. Port configuration parameters that were set by the WAGO
I/O Field Webserver, the WAGO I/O Field app or the OPC UA client are overwritten.
If you have changed parameters of the port configuration via the WAGO I/O Field Web-
server, the WAGO I/O Field app or the OPC UA Client, please note that these changes
are initially applied by the module, but the EtherCAT
ration again the next time it starts up. If you want to change parameters of the port config-
uration, set them in the configuration software of the EtherCAT

5.5.2 WAGO Webserver I/O Field

The WAGO I/O System Field module has an integrated Webserver. It can be accessed
with a standard Web browser in order to use the following functions:
• Display port information for ports X01, X02 etc.
• Display and modify module settings.
• User setup and management, as well as user login and logout
• Reset module to factory settings and restart firmware.
28 Product manual | Version: 1.0.0
16DIO FLD EC DC 24V 2.0A
Description
The WAGO_series765.xml and WAGO_series765_diag.xml device descrip-
tion files contain the WAGO I/O System Field modules. The configuration soft-
ware of the EtherCAT
and parameterize one or more modules of the 765 Series.
The user loads the configuration onto the EtherCAT
master configures and parameterizes the 765 modules via EtherCAT
Series module. Using a Web browser, the user can view the Web pages and dis-
play and modify parameters.
The WAGO I/O Field app is an app for mobile devices that can communicate
with a 765 Series module via Bluetooth
the 765 series module, read and write process data, and display diagnostics.
®
EtherCAT Module
®
Master The EtherCAT
configures the 765 Series
module.
–
–
®
are always rewritten upon restart
®
communication starts up, the master transfers the configuration
®
master imports these XML files, and the user can select
®
. With the app, the user can parameterize
®
module
Port Configuration
® ®
master The EtherCAT master sets the parameter selected by
the user on the basis of the parameters in the XML file
WAGO_series765.xml. These parameters configure
each individual port and determine whether the port is
used as a digital input or digital output (or is disabled).
Yes
Yes
®
master overwrites the port configu-
765-1202/0100-0000
®
master. The EtherCAT
®
.
Table 28: Parameterization Overview
®
master.
®