Wago Webserver I/O Field; Table 33 Function Overview For Wago I/O Field Webserver And Wago Io-Link Modules - WAGO 765-4203/0100-0000 Product Manual

765-4203/0100-0000
The WAGO IO-Link Configurator software can be launched as a stand-alone program
from the Start menu or with the desktop icon, or in connection with WAGO I/O-CHECK. It
then provides the functions necessary for connecting to WAGO IO-Link masters or
searching for them.
You can find further information in the product manual WAGO IO-Link Configurator.
The manual is available in the download area for the WAGO IO-Link Configurator soft-
ware at ü www.wago.com, item number 0765-4203/0100-0000.

5.5.3 WAGO Webserver I/O Field

The WAGO I/O System Field module has an integrated Webserver. It can be accessed
with a standard Web browser in order to use the following functions:
• Display port information for ports X01, X02 etc.
• Display and modify module settings.
• User setup and management, as well as user login and logout
• Reset module to factory settings and restart firmware.
• Simulating inputs; forcing outputs
Examples of port information include:
• Display current measured values for the ports: temperature, voltage, current and state
on pins 1, 2 and 4
• Display information about the connected IO-Link module
• Display the status information for the entire port
• Configure ports, e.g. set operating mode
• Read and write access to the connected IO-Link devices
• Show process data
The module settings include:
• Select method for obtaining IP address
• Select the origin of the configuration data used
• Display and enter maintenance information
• Reset module to factory settings.
• Load firmware onto the module
• Display and set parameters for Bluetooth
• Update Bluetooth
Function overview
The following overview shows the functions offered by WAGO Webserver I/O Field that is
integrated into the product and the menu items/tabs in the user interface that can be used
to address these functions:
Menu
Dashboard
Port X01, X02, ...
Product manual | Version: 1.0.0
4PORT IOL-A FLD EC DC 24V 2.0A
®
firmware
Table 33: Function Overview for WAGO I/O Field Webserver and WAGO IO-Link Modules
Tab
-
(All)
Information
®
connection to the module
Description Section
Displaying product infor-
mation
8 Configure Ports
Port information and set-
tings for IO-Link ports X01,
[} 73]
X02, ...
Display measured values
of a port and information
on the connected IO-Link
Functions
33