MIDI transmission from KRONOS controllers Dynamic MIDI Destinations
MIDI transmission from KRONOS controllers
The following tables show the relation between the MIDI
messages that are transmitted when the KRONOS's
controllers are operated, and the AMS (alternate modulation
source) or DMS (dynamic modulation source) that
correspond to each MIDI message.
# indicates a fixed function, and * indicates an assignable
function.
When one of the KRONOS's controllers is operated, the
corresponding or the assigned control change will be
transmitted.
If you choose KARMA RTC Slider 1–8, KARMA RTC SW
1–8, or PAD 1–8, its MIDI control change message will be
transmitted according to the settings in Global P2–
Controller (2–1b).
The following sections describe operation in each mode.
1133