Korg KRONOS SGX-2 Parameter Manual page 1141

Note: If you want to use the +X axis of the vector joystick as
a source, set the P1–5b: Vector CC Control parameter "+X"
to CC#85 for the desired program, combination, or song.
VJS -X Mod. (CC#86)
The -X direction (the right direction) of the vector joystick
(CC#86) will be the source.
Note: If you want to use the –X axis of the vector joystick as
a source, set the P1–5b: Vector CC Control parameter "–X"
to CC#86 for the desired program, combination, or song.
VJS +Y Mod. (CC#87)
The +Y direction (away from yourself) of the vector joystick
(CC#87) will be the source.
Note: If you want to use the +Y axis of the vector joystick as
a source, set the P1–5b: Vector CC Control parameter "+Y"
to CC#87 for the desired program, combination, or song.
VJS -Y Mod. (CC#88)
The -Y direction (toward from yourself) of the vector
joystick (CC#88) will be the source.
Note: If you want to use the –Y axis of the vector joystick as
a source, set the P1–5b: Vector CC Control parameter "–Y"
to CC#88 for the desired program, combination, or song.
KARMA On/Off*
The KARMA ON/OFF switch will be the source.
KARMA Latch*
The corresponding KARMA LATCH switch will be the
source.
KARMA Slider 1...8*
The corresponding KARMA SLIDER 1–8 will be the
source.
KARMA SWITCH 1...8*
The KARMA SWITCH 1–8 will be the source.
KARMA Scene 1...9, KARMA Scene-Any
*
The KARMA SCENE 1–9 will be the source.
If you choose KARMA Scene-Any, the switch you operated
will be the source.
*Note: If a MIDI control change is assigned in the Global 2–
1: Controllers/Scales page, this will be controlled by
reception of the assigned MIDI control change.
Pad 1...8, Pad-Any (CC110...117, Note Number)
The Pads 1–8 will be the source.
If you choose Pad-Any, the pad you operated will be the
source.
Note: If a MIDI control change or Note Number is assigned
in the Global 2–1: Controllers/Scales page, this will be
controlled by reception of the assigned MIDI control change
or Note Number. The default values are shown.
AfterT
Aftertouch (channel aftertouch) will be the source.
JS X
The X (horizontal) direction of the joystick will be the
source.
Dynamic MIDI Sources & Destinations Dynamic MIDI Sources
For JS X, Polarity (7–7b) allows you to select +/– or
–/+ in addition to the usual + or – operations.
When the controller is moved all the way to the left or right
(or top or bottom), the value will change as follows. The
example shown below is for when Tempo is selected as the
destination. (Original tempo is q=100 BPM, "Bottom/Top":
000/127)
+: Far left (0)
100 BPM
–: Far left (0)
100 BPM
+/–: Far left (minimum)
(maximum)
50 BPM
–/+: Far left (maximum)
(minimum)
200 BPM
Note Group:
When using the Note Group Sources, Bottom and Top(7–
7b) refer to MIDI Note Numbers C-1...G9:
000: C-1...012: C0...024: C1...036: C2...
045: C3...060: C4...072: C5...084: C6...
096: C7...108: C8...120: C9...127: G9
Short Note
Use Bottom and Top (7–7b) to specify the range of note
numbers. Only notes within the specified range with a
duration of less than 45 ms between note-on and note-off
will be the source.
Note
Use Bottom and Top (7–7b) to specify the range of note
numbers. Notes within the specified range will be the source.
(→Short Note)
Note Inside Zone
Notes within the key zone of the KARMA module (Program
7–1b, Combination 7–1c, Sequencer 7–1c) will be the
source.
Use "Input" to specify the applicable KARMA module.
Note Outside Zone
Notes outside the key zone of the KARMA module
(Program 7–1b, Combination 7–1c, Sequencer 7–1c) will be
the source.
Use "Input" to specify the applicable KARMA module.
White Note
Use Bottom and Top (7–7b) to specify the range of note
numbers. Only the white notes (C, D, E, F, G, A, B) within
the specified range will be the source.
Black Note
Use Bottom and Top (7–7b) to specify the range of note
numbers. Only the black notes (C#, D#, F#, G#, A#) within
the specified range will be the source.
far right (maximum)
200 BPM
far right (maximum)
50 BPM
center (0) far right
100 BPM 200 BPM
center (0) far right
100 BPM 50 BPM
1127