Chapter 5: Performing Predelivery Checks; Recording Serial Numbers - MacDon M155 Unloading And Assembly Instructions

5 Performing Predelivery Checks
Perform all procedures in this chapter in the order in which they are listed.
IMPORTANT:
The machine is factory-set and should not require further adjustments; however, perform the following checks to
ensure your machine operates at maximum performance. Adjustments should be made only if absolutely
necessary and in accordance with the instructions in this manual.

5.1 Recording Serial Numbers

Record the windrower and engine serial numbers on the
1. The windrower serial number plate (A) is located on the
left side of the main frame near the walking beam
as shown.
2. The engine serial number plate (A) is located on top of
the engine cylinder head cover as shown.
214298
Predelivery Checklist, page
Figure 5.1: M155/M205 Serial Number Location
Figure 5.2: Engine Serial Number Location
215
261.
Revision A