MacDon M155 Unloading And Assembly Instructions page 207

5. Press SELECT (B) until ACTIVATE FUNCTIONS? is
displayed on the upper line.
•
NO/YES is displayed on the lower line.
6. Press right arrow (A) to select YES. Press SELECT (B).
CAUTION
Check to be sure all bystanders have cleared the area.
7. Press SELECT (D) until ACTIVATE HEADER HT is
displayed on the upper line.
•
DOWN/UP is displayed on the lower line.
8. Press and hold left arrow (B) to lower header, or press
and hold right (C) arrow to raise header. Verify header is
functioning properly.
9. Press PROGRAM (A) to exit Programming Mode or
press SELECT (D) to proceed to next ACTIVATE
FUNCTION.
214298
CAB DISPLAY MODULE (CDM)
Figure 4.107: M155 Functions Shown – M205
Similar
Figure 4.108: M155 Header Height Shown –
M205 Similar
195
Revision A