MacDon M155 Unloading And Assembly Instructions page 86

Table 3.1 Engine Start Troubleshooting (continued)
Problem
Crankcase oil too heavy
Low battery output
Poor battery connection
Faulty starter
Wiring shorted, circuit breaker open
Faulty injectors
214298
ASSEMBLING THE WINDROWER
Solution
• Use recommended oil
• Test the battery
• Check battery electrolyte level
• Clean and tighten loose connections
• Refer to the windrower technical manual
• Check continuity of wiring and breaker (manually reset)
• Refer to the windrower technical manual
74
Revision A