MacDon M155 Unloading And Assembly Instructions page 223

5. Press SELECT (B) until ACTIVATE FUNCTIONS? is
displayed on the upper line.
•
NO/YES is displayed on the lower line.
6. Press right arrow (A) to select YES. Press SELECT (B).
CAUTION
Check to be sure all bystanders have cleared the area.
7. Press SELECT (D) until ACTIVATE REEL F/A is
displayed on the upper line.
•
FORE/AFT is displayed on the lower line.
8. Verify reel fore-aft is functioning properly.
a. Press and hold left arrow (B) to move reel forward.
Press and hold right arrow (C) to move
reel backward.
b. Press PROGRAM (A) to exit Programming Mode
or press SELECT (D) to proceed to next ACTIVATE
FUNCTION.
214298
CAB DISPLAY MODULE (CDM)
Figure 4.139: M155 Functions Shown – M205
Similar
Figure 4.140: M155 Reel Fore-Aft Shown – M205
Similar
211
Revision A