MacDon M155 Unloading And Assembly Instructions page 116

Self-propelled windrower
Table of Contents

Advertisement

20. Connect header drive hoses (A) and electrical
harness (B) to header. Refer to the draper header
operator's manual.
21. Connect reel hydraulics (A) at right cab-forward side of
windrower. Refer to the draper header operator's
manual.
22. Start engine and raise and lower the header and the
reel a few times to remove trapped air.
214298
ASSEMBLING THE WINDROWER
Figure 3.167: Header Drive Hoses and Harness
Figure 3.168: Reel Hydraulics
104
Revision A

Advertisement

Table of Contents
loading

This manual is also suitable for:

M205M155e4 2017

Table of Contents