MacDon M155 Unloading And Assembly Instructions page 70

5. Attach the main beam of the platform to the side frame
using three 1/2 x 1-1/4 in. long carriage bolts (A).
Ensure the bolt heads face inboard, and tighten just
enough to permit adjustment.
6. Attach the steering arm to the frame with two
3/8 x 3/4 in. long carriage bolts and nuts (A). Ensure the
bolt heads face inboard, and tighten bolts.
7. Remove sling.
8. Attach the railings to the platform with 1/2 x 3/4 in.
locking bolts (A) provided. Tighten bolts to 102 Nm
(75 lbf·ft).
214298
ASSEMBLING THE WINDROWER
Figure 3.69: Left Platform – Main Beam
Figure 3.70: Left Platform – Steering Arm
Figure 3.71: Left Platform – Railings
58
Revision A