MacDon M155 Unloading And Assembly Instructions page 209

5. Press SELECT (B) until ACTIVATE FUNCTIONS? is
displayed on the upper line.
•
NO/YES is displayed on the lower line.
6. Press right arrow (A) to select YES. Press SELECT (B).
7. Press SELECT (D) until ACTIVATE REEL HT is
displayed on the upper line.
•
DOWN/UP is displayed on the lower line.
CAUTION
Check to be sure all bystanders have cleared the area.
8. Press and hold left arrow (B) to lower reel. Press and
hold right arrow (C) to raise reel.
IMPORTANT:
Verify reel is functioning properly.
9. Press PROGRAM (A) to exit Programming Mode or
press SELECT (D) to proceed to next ACTIVATE
FUNCTION.
214298
CAB DISPLAY MODULE (CDM)
Figure 4.111: M155 Functions Shown – M205
Similar
Figure 4.112: M155 Reel Height Shown – M205
Similar
197
Revision A