13. Locate two hoses (red ties) (A) inside frame.
14. Route right hose behind bundle.
15. Remove caps, make connection, and tighten fitting.
16. Position hoses into frame.
17. Retrieve long hose (MD #119328 [white tie]) (A) and
route through the hole in the left frame.
18. Remove caps on hose (A) and valve block fitting (white
tie) (B) and make connection. Tighten fitting.
214298
ASSEMBLING THE WINDROWER
Figure 3.40: Hose Routing
Figure 3.41: Hose Routing
Figure 3.42: Valve Block
46
Revision A