3. Press SELECT (B) until CAB DISPLAY SETUP? is
displayed on the upper line.
•
NO/YES is displayed on the lower line.
4. Press right arrow (A) to select YES. Press SELECT (B).
•
DISPLAY LANGUAGE? is displayed on the
upper line.
5. Press SELECT (D) until DISPLAY CONTRAST is
displayed on the upper line.
•
Default setting is displayed on the lower line.
6. Press left (B) or right (C) arrows to adjust display
contrast.
7. Press PROGRAM (A) to exit Programming Mode or
press SELECT (D) to proceed to next CAB DISPLAY
SETUP? action.
214298
CAB DISPLAY MODULE (CDM)
Figure 4.76: M155 Cab Display Setup Shown –
M205 Similar
Figure 4.77: M155 Display Contrast Shown –
M205 Similar
181
Revision A