5. Press SELECT (B) until ACTIVATE FUNCTIONS? is
displayed on the upper line.
•
NO/YES is displayed on the lower line.
6. Press right arrow (A) to select YES. Press SELECT (B).
7. Press SELECT (D) until ACTIVATE HDR TILT is
displayed on the upper line.
•
IN/OUT is displayed on the lower line.
8. Press and hold left arrow (B) to decrease header tilt.
Press and hold right arrow (C) to increase header tilt.
IMPORTANT:
Verify header is functioning properly.
9. Press PROGRAM (A) to exit Programming Mode or
press SELECT (D) to proceed to next ACTIVATE
FUNCTION.
214298
CAB DISPLAY MODULE (CDM)
Figure 4.115: M155 Functions Shown – M205
Similar
Figure 4.116: M155 Header Tilt Angle Shown –
M205 Similar
199
Revision A